The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2’700 mW after optics.
The tarm 2.5 (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 2.5 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The benefits include:
- 2’700 mW guaranteed output power
- a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
- high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
- pure diode laser
- novel method for increasing the beam precision of the single-mode diodes
- beautiful colors and good color fading
- the tarm 2.5 impresses with a very bright 637 nm single mode red
- trim pots for adjusting color intensity
The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of less than 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 637 nm), a green (700 mW / 520 nm), and a blue (1’500 mW / 450 nm) diode laser source.
The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210H scanners with 60 kpps@8° ILDA and a max. scan angle of 60° (@35 kpps).
This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.
The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
|Guaranteed power at aperture:||2’700 mW|
|Power Red:||700 mW / 637 nm|
|Power Green:||750 mW / 520 nm|
|Power Blue:||1’500 mW / 450 nm|
|Beam Specifications (full angle):||ca. 3.5 mm / < 0.9 mrad|
|Operation Modes:||ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave|
|Scanner:||45kpps ILDA 8°|
optional CT-6210H: 60kpps ILDA 8°; max. 60°.
|Scan Angle max.:||max. 45°|
|Accessories:||power cable, manual, key, interlock connector|
|Power Supply:||85 V – 250 V / AC|
|Power Consumption:||100 W|
|Dimensions:||220 / 220 / 150 mm|